View UPG2214TK_7056590.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

caution : observe precautions when handling because these devices are sensitive to electrostatic discharge l, s - band spdt switch gaas integrated circuit ? pg2214tk document no. pg10475ej0 4 v0ds ( 4 th edition) date published octo ber 2004 cp(k) the mark ? shows major revised points. description the ? pg 2214tk is a gaas mmic for l , s - band spdt (single pole double throw) switch which was developed for mobile phone and another l , s - band application. this device can operate 2 control switching by control voltage 1.8 to 5.3 v. this devic e can operate frequency from 0. 0 5 to 3.0 ghz, having the low insertion loss and high isolation. this device is housed in a 6 - pin lead - less minimold (1511) package. and this package is able to high - density surface mounting. features ? switch control volta ge : v cont (h) = 1.8 to 5.3 v ( 3.0 v typ.) : v cont (l) = ? 0.2 to +0.2 v (0 v typ.) ? low insertion loss : l ins 1 = 0.25 db typ. @ f = 0. 0 5 to 0.5 ghz, v cont (h) = 3.0 v, v cont (l) = 0 v : l ins 2 = 0.25 db typ. @ f = 0.5 to 1.0 ghz, v cont (h) = 3.0 v, v co nt (l) = 0 v : l ins 3 = 0.30 db typ. @ f = 1.0 to 2.0 ghz, v cont (h) = 3.0 v, v cont (l) = 0 v : l ins 4 = 0.35 db typ. @ f = 2.0 to 2.5 ghz, v cont (h) = 3.0 v, v cont (l) = 0 v : l ins 5 = 0.35 db typ. @ f = 2.5 to 3.0 ghz, v cont (h) = 3.0 v, v cont (l) = 0 v ? high isolation : isl 1 = 32 db typ. @ f = 0. 0 5 to 0.5 ghz, v cont (h) = 3.0 v, v cont (l) = 0 v : isl 2 = 28 db typ. @ f = 0.5 to 1.0 ghz, v cont (h) = 3.0 v, v cont (l) = 0 v : isl 3 = 27 db typ. @ f = 1.0 to 2.0 ghz, v cont (h) = 3.0 v, v cont (l) = 0 v : isl 4 = 26 db typ. @ f = 2.0 to 2.5 ghz, v cont (h) = 3.0 v, v cont (l) = 0 v : isl 5 = 24 db typ. @ f = 2.5 to 3.0 ghz, v cont (h) = 3.0 v, v cont (l) = 0 v ? h andling power : p in (1 db) = + 27 .0 dbm typ. @ f = 0.5 to 3.0 ghz, v cont (h) = 3.0 v, v cont (l) = 0 v : p in (1 db) = +20.0 dbm typ. @ f = 0.5 to 3.0 ghz, v cont (h) = 1.8 v, v cont (l) = 0 v ? high - density surface mounting : 6 - pin lead - less minimold package ( 1.5 ? 1. 1 ? 0. 55 mm) applications ? l , s - band digital cellular or cordless telephone ? w - lan , wll and bluetooth tm etc. ordering information part number package marking supplying form ? pg2214tk - e2 6 - pin lead - less minimold (1511) g4k ? embossed tape 8 mm wide ? pin 1, 6 face the perforation side of the tape ? qty 5 kpcs/reel remark to order e valuation samples, contact your nearby sales office. part number for sample order: ? pg2214tk - a
data sheet pg10475ej0 4 v0ds 2 ? pg2214tk pin connections and internal block diagram pin no. pin name 1 output1 2 gnd 3 output2 4 v cont 2 5 input 6 v cont1 truth table v cont1 v cont2 input ? output1 input ? output2 low high on off high low off on absolute maximum ratings (t a = +25 ? parameter symbol ratings unit switch control voltage v cont + 6.0 note v input power p in +3 0 dbm operating ambient temper ature t a ? 45 to +85 ? c storage temperature t stg ? 55 to +150 ? c note ? v cont1 ? v cont2 ? ? 6.0 v recommended operating range (t a = +25 ? parameter symbol min. typ. max. unit switch control voltage (h) v cont (h) 1.8 3.0 5.3 v switch control voltage (l) v cont (l) ? 0.2 0 0.2 v
data sheet pg10475ej0 4 v0ds 3 ? pg2214tk electrical characteristics (t a = +25 ? cont (h) = 3.0 v, v cont (l) = 0 v, dc cut capacitors = 100 pf, unless otherwise specified) parameter symbol test conditions min. typ. max. unit insertion loss 1 l ins 1 f = 0. 0 5 to 0.5 ghz note 1 ? 0.25 0.45 db insertion loss 2 l ins 2 f = 0.5 to 1.0 ghz ? 0.25 0.45 db insertion loss 3 l ins 3 f = 1 .0 to 2. 0 ghz ? 0.3 0 0.5 0 db insertion loss 4 l ins 4 f = 2.0 to 2.5 ghz ? 0.35 0.55 db insertion loss 5 l ins 5 f = 2.5 to 3.0 ghz ? 0.35 0.60 db isolation 1 isl 1 f = 0.05 to 0.5 ghz note 1 29 32 ? db isolation 2 isl 2 f = 0.5 to 1.0 ghz 25 28 ? db isolation 3 isl 3 f = 1.0 to 2.0 ghz 24 27 ? db isolation 4 isl 4 f = 2.0 to 2.5 ghz 23 26 ? db isolation 5 isl 5 f = 2.5 to 3.0 ghz 21 24 ? db input return loss 1 rl in1 f = 0.05 to 0.5 ghz note 1 15 20 ? db input return loss 2 rl in2 f = 0.5 to 3.0 ghz 15 20 ? db output return loss 1 rl out1 f = 0.05 to 0.5 ghz note 1 15 20 ? db output return loss 2 rl out2 f = 0.5 to 3.0 ghz 15 20 ? db 0.1 db loss compression p in (0.1 db) f = 2.0/ 2 . 5 ghz + 2 1 . 0 + 2 3 .0 ? dbm input power note 2 f = 0.5 to 3.0 ghz ? +23.0 ? dbm 1 db loss compression input power note 3 p in (1 db) f = 0.5 to 3.0 ghz ? +27.0 ? dbm 2nd harmonics 2f 0 f = 2. 0 gh z , p in = +15 dbm ? ? 55 ? 47 db c f = 2.5 ghz, p in = +15 dbm ? ? 55 ? 47 dbc 3rd harmonics 3f 0 f = 2.0 ghz, p in = +15 dbm ? ? 55 ? 47 dbc f = 2.5 ghz, p in = +15 dbm ? ? 55 ? 47 dbc intermodulation intercept point iip 3 f = 0.5 to 3.0 ghz, 2 tone, p in = +16 d bm, 5 mhz spicing ? +58 ? dbm switch control current i cont ? 4 20 ? a switch control speed t sw 50% ctl to 90/10% rf ? 2 0 2 00 ns note s 1. dc cut capacitors = 1 000 pf at f = 0.05 to 0.5 ghz 2. p in ( 0. 1 db) is measured the input power level when the ins ertion loss increases more 0. 1 db than that of linear range. 3. p in (1 db) is measured the input power level when the insertion loss increases more 1 db than that of linear range.
data sheet pg10475ej0 4 v0ds 4 ? pg2214tk electrical characteristics (t a = +25 ? cont (h) = 1.8 v, v cont (l) = 0 v, dc cut capacitors = 100 pf, unless otherwise specified) parameter symbol test conditions min. typ. max. unit insertion loss 6 l ins6 f = 0.05 to 0.5 ghz note 1 ? 0.25 0.50 db insertion loss 7 l ins7 f = 0.5 to 1.0 ghz ? 0.25 0.50 db insertion loss 8 l ins8 f = 1.0 to 2.0 ghz ? 0.30 0.55 db insertion loss 9 l ins9 f = 2.0 to 2.5 ghz ? 0.35 0.60 db insertion loss 10 l ins10 f = 2.5 to 3.0 ghz ? 0.35 0.65 db isolation 6 isl6 f = 0.05 to 0.5 ghz note 1 2 7 30 ? db isolation 7 isl7 f = 0.5 to 2.0 ghz 23 2 7 ? db isolation 8 isl8 f = 2.0 to 2.5 ghz 2 1 25 ? db isolation 9 isl9 f = 2.5 to 3.0 ghz 20 2 4 ? db input return loss 3 rl in3 f = 0.05 to 3.0 ghz note 1 15 20 ? db output return loss 3 rl out3 f = 0.05 to 3.0 ghz note 1 15 20 ? db 0.1 db loss compress ion input power note 2 p in (0.1 db) f = 2.0/2.5 ghz +14.0 +17.0 ? dbm f = 0.5 to 3.0 ghz ? +17.0 ? dbm 1 db loss compression input power note 3 p in (1 db) f = 0.5 to 3.0 ghz ? +20.0 ? dbm switch control current i cont ? 4 20 ? a switch control speed t sw 50% ctl to 90/10% rf ? 20 200 ns notes 1. dc cut capacitors = 1 000 pf at f = 0.05 to 0.5 ghz 2. p in (0.1 db) is measured the input power level when the insertion loss increases more 0.1 db than that of linear range. 3. p in (1 db) is measured the in put power level when the insertion loss increases more 1 db than that of linear range. caution this device is used it is necessary to use dc cut capacitors. the value of dc cut capacitors should be chosen to accommodate the frequency of operation, bandwi dth, switching speed and the condition with actual board of your system. the range of recommended dc cut capacitor value is less than 100 pf.
data sheet pg10475ej0 4 v0ds 5 ? pg2214tk evaluation circuit note c0 : 0.05 to 0.5 ghz 1 000 pf : 0.5 to 3.0 ghz 100 pf the application circuits and their parameters are for reference only and are not intended for use in actual design - ins.
data sheet pg10475ej0 4 v0ds 6 ? pg2214tk illustration of the test circuit assembled on evaluation board using the evaluation board symbol values c1, c2, c3 100 pf c4, c5 1 000 pf
data sheet pg10475ej0 4 v0ds 7 ? pg2214tk typical characteristics (t a = +25 ? cont (h) = 3.0 v, v cont (l) = 0 v, dc cut capacitors = 100 pf, unless othe rwise specified) remark the graphs indicate nominal characteristics. caution these characteristics value s include the loss es of the evaluation board.
data sheet pg10475ej0 4 v0ds 8 ? pg2214tk remark the graphs indicate nominal characteristics.
data sheet pg10475ej0 4 v0ds 9 ? pg2214tk remark the graph indicate nominal c haracteristics.
data sheet pg10475ej0 4 v0ds 10 ? pg2214tk package dimensions 6 - pin lead - less minimold (1511) (unit: mm)
data sheet pg10475ej0 4 v0ds 11 ? pg2214tk recommended soldering conditions this product should be soldered and mounted under the following recommended conditions. for soldering methods and conditions othe r than those recommended below, contact your nearby sales office. soldering method soldering conditions condition symbol infrared reflow peak temperature (package surface temperature) : 260 ? c or below time at peak temperature : 10 seconds or less time at temperature of 220 ? c or higher : 60 seconds or less preheating time at 120 to 180 ? c : 120 ? 30 seconds maximum number of reflow processes : 3 times maximum chlorine content of rosin flux (% mass) : 0.2%(wt.) or below ir260 vps peak temperature (package sur face temperature) : 215 ? c or below time at temperature of 200 ? c or higher : 25 to 40 seconds preheating time at 120 to 150 ? c : 30 to 60 seconds maximum number of reflow processes : 3 times maximum chlorine content of rosin flux (% mass) : 0.2%(wt.) or belo w vp215 wave soldering peak temperature (molten solder temperature) : 260 ? c or below time at peak temperature : 10 seconds or less preheating temperature (package surface temperature) : 120 ? c or below maximum number of flow processes : 1 time maximum chlo rine content of rosin flux (% mass) : 0.2%(wt.) or below ws260 partial heating peak temperature (pin temperature) : 350 ? c or below soldering time (per side of device) : 3 seconds or less maximum chlorine content of rosin flux (% mass) : 0.2%(wt.) or below hs350 caution do not use different soldering methods together (except for partial heating).
12 data sheet pg10475ej0 4 v0ds ? pg2214tk caution gaas products this product uses gallium arsenide (gaas). gaas vapor and p owder are hazardous to human health if inhaled or ingested, so please observe the following points. ? follow related laws and ordinances when disposing of the product. if there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. ? do not burn, destroy, cut, crush, or chemically dissolve the product. ? do not lick the product or in any way allow it to enter the mouth.

▲Up To Search▲

Price & Availability of UPG2214TK

	To Download UPG2214TK Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .